1K Primer SurfacerQ- Polyester Putty - Foshan Mingbang Chemical Co.,Ltd

Composition: modulation from. synthesis of fatty ester resin ,add pigments, fillers, additives(auxiliaries) and organic solvents.

Uses: It is the seal car paint after putty, red or gray paste be polished smoothly.

Usage: spraying after use our factory’s nitro lacquer thinner mixing viscosity, grinding after dry, after formation can coat the top paint.

	Features	Dry fast, esay sanding, single-component intermediate paint,use convenient, Good inter-coat adhesion, good filling, good hide power, is easy to fill small scratch marks, pinholes and surface flaws. easy to sandãÂÂÂÂÂÂÂÂÂÂQ-608 in red, Q—608 in gray,Q-608 in yellow are available.
	Applicable base materials	Thoroughly sand and intact existing layer surface, (Original paint and completely dry 2K paint paint and putty surface).
	Inapplicable base materials	Aluminum and stainless steel \ plastic \ galvanized steel and wood.
	Mixing ratio	Q-608 Single-component Filler; QX-1 Thinner=1:0.8~1
	Application method	spread with putty knife
	Applying layers	2-3 layers, 15-25μm in total
	Interval	5-10 minutes, 20âÂÂÂÂÂÂÂÂÂÂ
	Spraying and applying tool	Geocentric spray gun (upper bottle) 1.4-1.6mm; 3-5kg/cm²
	Spraying air pressure	Suction spray gun (lower bottle) 1.3-1.8mm; 3-5kg/cm²
	Curing time (can sand)	20âÂÂÂÂÂÂÂÂÂÂ 30 minutes
	Reapplication	After curing and Sanding, re-coat the top coat of our company.
	Storage life	Store for more than two years keep in original container at 20âÂÂÂÂÂÂÂÂÂÂ.
	Packaging	1L canned.

3. It is recommended to use 2K primer surface to achieve good adhesion and strong corrosion resistance.